THE PROBLEM SOLVER - PLANCOFIX
This is how the PLANCOFIX works
Embedded in the floor screed of the bathroom the PLANCOFIX could be the the drain in a tiled shower. The shower water will flow into the PLANCOFIX, a combination of drain and pump.
The powerful and quiet operational pump is initiated by a float switch and transports wastewater out of the shower even in the remotest corners of the building directly to the next downpipe. It pumps a water volume of up to 30 liters per minute and is suitable for showers with a high flow volume.
The pump housing can easily be cleaned from usual impurities like hair, fluff and sand. The pump hydraulic can be easily removed from above and then be rinsed with clear water.
DISCOVER THE NEW POSSIBILITIES THAT PLANCOFIX WILL OPEN UP FOR YOU:
-
Installation of an accessible bathroom
-
In almost every old building
-
In the attic floor
-
Everywhere the wastewater could not reach the downpipe only with gravity flow
EVERY SHOWER CAN BE BARRIER-FREE!
-
Remove the old shower and prepare an appropriate opening in the floor
-
Prepare pressure pipe and power supply
-
Place the PLANCOFIX into the opening and connect it
-
Stick together the sealing sheet, apply floor screed and tiles – Ready
INSTALLED EVERYWHERE PLAIN AND SIMPLE!
-
Directly in the shower.
-
Next to the shower in combination with a constructed shower channel.
-
Different visual options possible